Marzhauser

From Micro-Manager

[edit] Marzhauser TANGO controller through Ludl adapter

Summary:	Interfaces with Marzhauser TANGO controllers and associated hardware through the Ludl adapter
Author:	Interface instructions: Falk Dettmar (Ludl adapter by Nenad Amodaj)
License:	BSD
Platforms:	All (uses serial interface)
Devices:	Controller, Shutter, XY Stage, Z Axis
Example Config File:	Media:MMConfig_Tango.cfg

The Marzhauser TANGO family of controllers can be controlled using the Ludl adapter. It is tested using the Tango-DT with serial interface. The Tango-PCI and Tango-DT were also tested on Windows using the USB interface. To configure Micro-Manager to work with the Marzhauser Tango you need to do the following:

1.	Install the TANGO and verify that it works.
2.	Switch TANGO to Ludl MAC5000 compatible mode.
3.	Download the MMConfig_Tango.cfg example configuration file and use it in Micro-Manager.

--Dettmar 23:41, 18 October 2007 (PDT)